Line Item SupplyIndustrial Equipment
Request a Quote

Loading dock calculator

What capacity dock leveler to order

Enter the truck, the heaviest load, and how many loads cross at the busiest hour. The calculator applies the dynamic factor the sizing guides use and rounds up to the next standard rating.

  • Gross rolling load times 2.0, 2.5, or 3.0 by traffic.
  • Adders for three-wheel trucks, speed, and hard wheels.
  • Standard ratings from 20,000 to 80,000 lb.

Ready for a price?

Name the truck and the dock count and the quotation lists the leveler, seal, bumpers, restraint, and light per position, freight to your dock included.

Dock levelers

Rated capacity from the gross rolling load and how hard the dock works

Gross rolling load (truck + load)
13,000 lb
Dynamic factor
2.5
Capacity required
32,500 lb
Order this rating or higher
35,000 lb

Planning rule from the leveler makers' sizing guides: the rating has to carry the moving truck, not its parked weight. Each maker rates to its own method (dynamic, static, or rolling) and confirms the rating on the order; 30,000 to 40,000 lb covers most sit-down counterbalance docks.

Read the guide: what the number means and how to use it

Get the line card, or have it priced

One email with what you asked for. No list, no newsletter.

Questions buyers ask

Why is the rating so much more than the truck plus the load?
A leveler is rated for a moving load, not a parked one. Braking, bouncing at the lip, hard wheels, and dozens of crossings an hour all multiply the stress, so the sizing guides take the gross rolling load and apply a factor of 2 to 3 or more.
What does a typical dock need?
A 5,000 lb sit-down counterbalance truck weighs about 9,000 lb, carries up to 5,000 lb, and on a busy dock lands at a 35,000 to 40,000 lb rating. Electric pallet jacks and walkies come in far lower; heavy forklifts, three-wheel trucks, and high-cycle cross-docks go higher.
Dynamic, static, or rolling: which rating is this?
The calculator gives the number to order against, in the gross-load-times-factor form most makers publish. Each maker tests and labels to its own method, so the quotation will state the method next to the rating and the factory confirms it for the truck you named.
Does leveler length change the capacity?
No, but it changes the grade. A longer leveler lowers the slope for the same bed-height difference, which matters for electric pallet jacks and low-clearance loads. Use the leveler length calculator for that.

Guide: Dock leveler capacity, how to size it. Also: leveler length and working range.