Loading dock calculator
How long a dock leveler needs to be
Enter the dock height and the lowest and highest trailer beds that come to the door. The calculator gives the working range to specify and the grade each standard length produces, then picks the shortest length under your grade limit.
- Bed heights for vans, reefers, flatbeds, containers, and straight trucks.
- Grade at 6', 8', 10', and 12'.
- Above and below dock range to put on the order.
Pricing a dock package?
Say which trucks come to the door and the quotation lists the leveler, seal or shelter, bumpers, restraint, and light per position.
Loading dock packageWorking range and grade for each standard leveler length
- Working range needed above the dock
- 8"
- Working range needed below the dock
- 8"
| Leveler length | Grade at the worst bed | Verdict |
|---|---|---|
| 6' | 11.1% | Too steep |
| 8' | 8.3% | Shortest that works |
| 10' | 6.7% | Works |
| 12' | 5.6% | Works |
Trailer bed heights, empty to loaded
| Dry van, 53' | 48" to 54" |
| Refrigerated van | 50" to 56" |
| Flatbed | 56" to 62" |
| Container on chassis | 56" to 62" |
| Straight truck, 24'-26' | 40" to 48" |
| Step van / cube truck | 36" to 44" |
| Low-bed / drop-deck | 30" to 40" |
Grade is the bed-height difference over the leveler length. Standard pit levelers come 6', 8', 10', and 12' long with 12" above and 12" below as the usual working range; the factory confirms the range on the model you order. Air suspension and an approach that slopes toward the building change the bed height while the trailer is loaded.
Read the guide: what the number means and how to use it
Questions buyers ask
- What grade is too steep?
- Counterbalance forklifts handle about 10%. Electric pallet jacks, walkies, and low-clearance loads want 7% or less, and a long leveler is cheaper than a damaged load or a stuck jack.
- Why would a 48-inch dock need range below the dock?
- Loaded straight trucks, cube vans, and some drop-deck trailers sit below 48 inches, and a loaded van on air suspension can settle several inches during unloading. If any of them come to the door, the leveler needs below-dock range and the bumpers and restraint have to allow it.
- How long should the leveler be?
- The length that keeps the worst-case grade under the limit. Most mixed docks land at 8 feet; docks serving flatbeds or containers from a 48-inch floor, or docks with electric pallet jacks, go to 10 or 12 feet.
- Does the approach slope matter?
- Yes. An apron that slopes toward the building tilts the trailer so the rear sits higher than its level bed height while the nose sits lower, and the trailer top leans into the building. Add the effect of the slope to the bed heights you enter and check the door head height.