Line Item SupplyIndustrial Equipment
Request a Quote

Material handling and racking

Forklift aisle width for right-angle stacking

The truck's turning radius and head length, the load length, and the clearance in; the aisle a lift truck needs to turn into a rack bay.

Read the guide: what the number means and how to use it

  • Counterbalance trucks: right-angle stacking aisle = outside turning radius + head length (drive axle center to the fork face) + load length + operating clearance. This is the ANSI/ITSDF B56.1 method the data sheets use for their 'right-angle stack' figure plus the load.
  • Reach trucks carry the load inside the straddle legs when turning, so the aisle is the turning radius plus clearance plus the straddle; VNA trucks swing the load inside the aisle, so the aisle is the load plus about 12 inches plus clearance.

Need it quoted?

Guardrail, bollards, rack protection, and mezzanines priced as line items.

Guardrail and protection

Forklift aisle width

RACKRACK13'-4"

Aisle width

160 in

13'-4"

In feet

13'-4"

Rule used
turning radius + head length + load length + clearance
Turning radius used
84 in
Head length used
16 in

One line for the file or the vendor

sit-down counterbalance, radius 84", head 16", load 48", clearance 12": aisle 160" (13'-4").

Keep this result, or have it priced

One email with what you asked for. No list, no newsletter.

How it is figured

  • Counterbalance trucks: right-angle stacking aisle = outside turning radius + head length (drive axle center to the fork face) + load length + operating clearance. This is the ANSI/ITSDF B56.1 method the data sheets use for their 'right-angle stack' figure plus the load.
  • Reach trucks carry the load inside the straddle legs when turning, so the aisle is the turning radius plus clearance plus the straddle; VNA trucks swing the load inside the aisle, so the aisle is the load plus about 12 inches plus clearance.

Where the numbers come from

  1. 1. Outside turning radius and head length (or 'right-angle stacking aisle') from the truck's specification sheet; the maker publishes both.
  2. 2. Load length is the pallet dimension that points down the aisle when the forks are in it, plus any overhang.
  3. 3. Clearance is how much room the drivers need on each side when they turn in; 12 inches for mixed drivers, 6 for a guided or experienced fleet.

Tools: the forklift spec sheet, a tape on the pallets

Sources: ANSI/ITSDF B56.1 (right-angle stacking aisle definition); Toyota, Crown, and Raymond truck specification sheets (turning radius, head length, RAS aisle). A planning calculator; the maker, the engineer of record, or the code official confirms the final number.

Questions people ask

How wide should a forklift aisle be?
A 5,000 lb sit-down counterbalance truck with a 48 in. load needs about 12 to 13 feet; a stand-up counterbalance about 10 to 11; a reach truck 8 to 9; a turret truck 5 to 6. Each foot of aisle saved is a row of racking gained, which is why the truck choice sets the warehouse layout.
Does the pallet orientation matter?
Yes. A 48 by 40 pallet carried on the 40 in. side needs 8 inches less aisle. Many layouts turn the pallets for that reason, at the cost of 8 more inches of rack depth.

Related calculators: Pallet positions, Forklift capacity vs load center, Forklift ramp grade. All calculators.