Material handling and racking
Ramp grade for forklifts and pallet jacks
Rise and run in, or the grade you have; the percent and degrees, whether a forklift, pallet jack, or walking traffic can use it, and the run needed to hit the limit.
Read the guide: what the number means and how to use it
- Grade = rise ÷ run × 100; angle = arctan(rise ÷ run). Run for a limit = rise ÷ limit.
- Limits: forklift makers rate loaded travel at 10 to 15% on dry surfaces and many fleets set 10%; electric pallet jacks about 7%; manual pallet jacks 5% because the operator pulls the load; ADA accessible routes 1:12 (8.33%) with landings every 30 inches of rise.
Need it quoted?
Guardrail, bollards, rack protection, and mezzanines priced as line items.
Guardrail and protectionForklift ramp grade
Grade
11.4 %
over the 10% limit
Angle
6.5 °
Run for 10%
480 in
40'-0"
- 11.4% is over the 10% that a loaded forklift should climb; lengthen the run to 40'-0" or lower the rise.
- Ratio
- 1:8.8
- Ramp surface length
- 423 in
One line for the file or the vendor
48" rise over 420" run: 11.4% (6.5°, 1:8.8); limit 10%, run needed 40'-0".
How it is figured
- Grade = rise ÷ run × 100; angle = arctan(rise ÷ run). Run for a limit = rise ÷ limit.
- Limits: forklift makers rate loaded travel at 10 to 15% on dry surfaces and many fleets set 10%; electric pallet jacks about 7%; manual pallet jacks 5% because the operator pulls the load; ADA accessible routes 1:12 (8.33%) with landings every 30 inches of rise.
Sources: OSHA 1910.178(n) (grades, forks downgrade with a load); ADA Standards 405 (ramp slope 1:12); Forklift and yard ramp manufacturer gradeability ratings. A planning calculator; the maker, the engineer of record, or the code official confirms the final number.
Questions people ask
- Why do yard ramps run 30 to 36 feet?
- A 48 in. dock over a 36 ft ramp is 11%, the most a loaded forklift should take; a 30 ft ramp is 13% and is for lighter loads or empty travel. Longer is safer and costs more steel.
Related calculators: Forklift aisle width, ADA ramp length, Dock leveler length and working range. All calculators.