Line Item SupplyIndustrial Equipment
Request a Quote

Material handling and racking · guide

Forklift capacity vs load center: the guide

A forklift's rating is a moment, not a weight: push the load center out and the weight the truck can lift comes down, and the data plate's number stops applying.

Open the calculator

Why this number matters

The truck balances on its front axle like a seesaw: the load on one side, the counterweight on the other. The plate rating is given at a load center, 24 inches on most trucks under 10,000 pounds, which is half of a standard pallet. A longer load, a crate, a coil, a pallet picked off-center, moves the load's center of gravity out and the same weight makes a larger moment. The capacity at the new center is the rated moment divided by the new lever arm, and the lever arm includes the distance from the front axle to the fork face, which is why that dimension is on the spec sheet.

Attachments compound it: a side shifter or a clamp adds its own weight and moves the load center forward, and OSHA requires a new capacity plate for the combination. Mast height takes its share too, since the rating is usually for the full lift height and a tall mast derates faster.

The arithmetic explains the tip-overs: a 5,000-pound truck lifting a 4,000-pound crate with a 36-inch load center is at 105% of what it can hold, and the first bump in the floor finishes it.

How it is figured

  • The truck is a lever on its front axle. Capacity × (load center + axle-to-fork distance) is the moment it can hold; at a longer load center the same moment allows less weight: capacity = rated × (rated LC + A) ÷ (actual LC + A).
  • The data plate rating already includes the stability margin; this scales it. Attachments add their own weight and their own load center shift, which the attachment's capacity plate covers.

A worked example

A 5,000-pound truck rated at a 24-inch load center with a 14-inch axle-to-fork distance holds a moment of 5,000 × 38 inch-pounds; at a 36-inch load center that moment allows 3,800 pounds, a 24% derate.

The tool's starting values, and what it returns for them:

Rated capacity5,000 lb
Rated load center24 in
Actual load center36 in
Front axle center to fork face14 in
Capacity at the actual load center3,800 lb
Capacity given up1,200 lb
Rated5,000 lb
Load moment the truck can hold15,833 ft-lb

Mistakes that catch people

  • Reading the plate rating as the capacity for any load.
  • Measuring the load center from the mast instead of the fork face.
  • Picking a 48-inch pallet by its 40-inch side and forgetting the load center just grew to 24 from 20.

Rules of thumb

  • Capacity falls roughly in proportion to (rated LC + A) ÷ (actual LC + A).
  • A 36-inch load center costs about a quarter of the rating; 48 inches about 40%.
  • Any attachment means a new plate from the maker.

When to stop calculating and make a call

  • Attachments, long loads, and tall masts: the truck maker issues the capacity plate.
  • Any lift near the derated limit: the stability triangle, not the arithmetic, decides.

Questions people ask

What is a load center?
The distance from the fork face to the load's center of gravity. A 48 in. pallet picked square has a 24 in. load center, which is why the ratings are written at 24. A 72 in. crate has a 36 in. load center and takes about 25% off the rating.

Standards and sources

  • OSHA 1910.178 (data plate and attachment capacity)
  • ANSI/ITSDF B56.1 (stability and load center)

This guide and the tool are planning aids. The equipment maker, the engineer of record, the accountant, or the code official confirms the final number for your building.