Line Item SupplyIndustrial Equipment
Request a Quote

Material handling and racking

Will the guardrail or bollard stop that forklift?

Forklift weight with its load and the speed it could hit at in; the impact energy, and whether a guardrail or barrier rated for a given weight at a given speed takes it.

Read the guide: what the number means and how to use it

  • Kinetic energy = ½ × mass × velocity², with mass = weight ÷ 32.174 and velocity in feet per second (mph × 1.467). Energy goes with the square of speed: twice the speed is four times the hit.
  • A rating stated as a weight at a speed is the same energy; the check compares the two. Makers test to their own protocols, so a margin is wise.

Need it quoted?

Guardrail, bollards, rack protection, and mezzanines priced as line items.

Guardrail and protection

Impact energy check

0%200%120%energy vs the rating

Impact energy

6,419 ft-lb

12,000 lb at 4 mph

Barrier rating

5,349 ft-lb

10,000 lb at 4 mph

Result

exceeded

20% over

  • 6,419 ft-lb is over the barrier's 5,349 ft-lb; a heavier rail, cast-in bollards, or a lower speed limit near the rail.
Speed this truck can hit it at
3.7 mph
Energy as a share of the rating
120 %

One line for the file or the vendor

12,000 lb at 4 mph = 6,419 ft-lb; barrier rated 10,000 lb at 4 mph = 5,349 ft-lb: exceeded; max 3.7 mph.

Keep this result, or have it priced

One email with what you asked for. No list, no newsletter.

How it is figured

  • Kinetic energy = ½ × mass × velocity², with mass = weight ÷ 32.174 and velocity in feet per second (mph × 1.467). Energy goes with the square of speed: twice the speed is four times the hit.
  • A rating stated as a weight at a speed is the same energy; the check compares the two. Makers test to their own protocols, so a margin is wise.

Sources: Physics of impact; manufacturer guardrail ratings (e.g. 10,000 lb at 4 mph); ASTM F3016 (low-speed vehicle impact test for barriers). A planning calculator; the maker, the engineer of record, or the code official confirms the final number.

Questions people ask

What does 10,000 lb at 4 mph mean?
About 5,350 foot-pounds: the rail absorbed a 10,000 lb truck at 4 mph in the maker's test. A 12,000 lb loaded forklift at 5 mph is 10,000 foot-pounds, nearly double, which is why speed limits near guardrail matter more than the rail itself.

Related calculators: Guardrail take-off, Bollard count, Forklift capacity vs load center. All calculators.