Offices, people, and code
Bollards to protect a wall, door, or equipment
Length to protect, spacing, and the things that get their own pair in; the bollards, the anchors, and the concrete if they are set in the ground.
Read the guide: what the number means and how to use it
- Along a line: length ÷ spacing + 1. Each door jamb, column, or piece of equipment gets a pair. Surface-mount bollards take four anchors each; cast-in bollards take a cored hole whose concrete volume is π × (diameter/2)² × depth.
Need it quoted?
In-plant offices sized to the headcount, pre-wired, with HVAC and restrooms, priced as line items.
Modular officesBollard count
Bollards
37
25 along the line + 12 at doors and equipment
Wedge anchors
148
Along the line
25
every 5 ft over 120 ft
- Surface-mount bollards on a slab stop a slow forklift; a loaded truck at speed needs cast-in-place bollards or a crash-rated barrier.
- Holes to core or dig
- 0none
One line for the file or the vendor
120 ft at 5 ft spacing + 6 doors/columns with a pair: 37 bollards, 148 anchors.
How it is figured
- Along a line: length ÷ spacing + 1. Each door jamb, column, or piece of equipment gets a pair. Surface-mount bollards take four anchors each; cast-in bollards take a cored hole whose concrete volume is π × (diameter/2)² × depth.
Sources: Bollard manufacturer installation guides (Omega, Ideal Shield); ASTM F3016 (low-speed vehicle impact ratings), where rated protection is needed. A planning calculator; the maker, the engineer of record, or the code official confirms the final number.
Questions people ask
- Surface mount or cast in?
- Surface-mount bollards on a 6 in. slab handle a forklift bump at walking speed and come out when the layout changes. Anything that must stop a vehicle, at a dock, a gate, or a utility, is set in concrete 3 ft deep or deeper.
Related calculators: Guardrail take-off, Dock doors needed, Forklift aisle width. All calculators.