Line Item SupplyIndustrial Equipment
Request a Quote

Loading dock

How many pallets fit in a trailer

Trailer length, pallet size, loading pattern, and the weight per pallet in; the floor positions, the double-stack count, and which limit, cube or weight, you hit first.

Read the guide: what the number means and how to use it

  • Rows = trailer inside length ÷ the pallet dimension that runs along the trailer; across = inside width (100 in. in a 102 in. van, 92 in. in a container) ÷ the other dimension. Floor positions = rows × across. Turned 48 x 40 pallets give 30 in a 53 ft van, straight 26, pinwheel about 28.
  • Double stacking doubles the positions where the loads allow. The weight limit is the payload ÷ pallet weight; the smaller count governs.

Need it quoted?

Send the door count and these numbers and the quotation comes back with the levelers, seals, bumpers, and restraints as line items.

Dock equipment

Pallets per trailer

15 rack rows × 2 positions per row at floor level, 30 positions total

Pallets on the load

30

limited by space

Floor positions

30

15 rows of 2

Load weight

45,000 lb

of 45,000 lb payload

Pallets by space
30single
Pallets by weight
30
Straight pattern, floor
26
Turned pattern, floor
30
Pinwheel, floor
28

One line for the file or the vendor

630" trailer, 48x40 pallets turned, 1500 lb each: 30 floor positions, 30 pallets, 45,000 lb.

Keep this result, or have it priced

One email with what you asked for. No list, no newsletter.

How it is figured

  • Rows = trailer inside length ÷ the pallet dimension that runs along the trailer; across = inside width (100 in. in a 102 in. van, 92 in. in a container) ÷ the other dimension. Floor positions = rows × across. Turned 48 x 40 pallets give 30 in a 53 ft van, straight 26, pinwheel about 28.
  • Double stacking doubles the positions where the loads allow. The weight limit is the payload ÷ pallet weight; the smaller count governs.

Sources: Trailer inside dimensions: 53 ft van 630 x 100 x 110 in.; FMCSA 80,000 lb GVW; GMA pallet 48 x 40 in.. A planning calculator; the maker, the engineer of record, or the code official confirms the final number.

Questions people ask

Why do shippers say 26 pallets, not 30?
Twenty-six is the straight load that a forklift can place without turning each pallet; thirty needs the pallets turned 90°, which some loads and some dock operations will not do. Pinwheeling mixes the two to get 28 with better bracing.

Related calculators: Dock doors needed, Forklift fleet size, Forklift capacity vs load center. All calculators.