Line Item SupplyIndustrial Equipment
Request a Quote

Air, heating, and ventilation

Air changes per hour and exhaust fan CFM

Room size and the air changes the use calls for in; the exhaust cfm, and how many fans of a given size.

Read the guide: what the number means and how to use it

  • cfm = room volume × air changes per hour ÷ 60. Air change rates are the common industrial design figures; codes and insurers set higher rates for specific hazards.
  • Exhaust needs make-up air: the intake free area at about 500 feet per minute face velocity.

Need it quoted?

HVLS fans, unit heaters, and ventilation priced with installation as line items.

Request a quote

Air changes and exhaust CFM

exhaust cfm32,000 cfm

Exhaust airflow

32,000 cfm

Fans

4

at 10,000 cfm each

Room volume

480,000 cu ft

Make-up air opening at 500 fpm
64 sq ft free arealouvers or open doors to let the air in

One line for the file or the vendor

200x100x24 ft (480,000 cu ft) at 4 ACH: 32,000 cfm, 4 fans at 10,000 cfm, 64 sq ft of intake.

Keep this result, or have it priced

One email with what you asked for. No list, no newsletter.

How it is figured

  • cfm = room volume × air changes per hour ÷ 60. Air change rates are the common industrial design figures; codes and insurers set higher rates for specific hazards.
  • Exhaust needs make-up air: the intake free area at about 500 feet per minute face velocity.

Sources: ASHRAE Standard 62.1 and HVAC Applications (industrial ventilation); ACGIH, Industrial Ventilation: A Manual of Recommended Practice. A planning calculator; the maker, the engineer of record, or the code official confirms the final number.

Questions people ask

How many air changes does a warehouse need?
Two to four per hour is the usual planning figure for general storage and dock areas; propane forklifts are better handled by the per-truck rule (see the forklift exhaust calculator). Battery charging rooms, paint, and welding are set by the specific codes and are much higher.
Will the exhaust fans work without intake?
No. A tight building starves the fans and pulls air through the dock seals and doors instead; size the louvers to the cfm.

Related calculators: Forklift exhaust ventilation, HVLS fan sizing, Warehouse heater BTU. All calculators.