Energy and payback
Air compressor size for a shop
The tools and how hard they run, leaks, and growth in; the cfm the compressor needs, the horsepower, and the receiver tank.
Read the guide: what the number means and how to use it
- Average demand = continuous cfm + intermittent cfm × duty cycle. Compressor delivery = demand × leak allowance × growth. Horsepower at about 4 cfm per hp (rotary screw at 100 psig; reciprocating 3 to 3.5).
- Receiver: 3 gallons per cfm of compressor capacity carries the peaks of intermittent tools; larger where many tools start together.
Need it quoted?
See what the first-year deduction does to the payback on the same purchase.
Section 179Air compressor sizing
Compressor delivery needed
52 cfm
at 100 psig
Compressor
15 hp
about 4 cfm per hp at 100 psig
Receiver tank
160 gal
about 3 gallons per cfm for intermittent loads
- Average demand
- 38 cfm
- Peak if every tool runs at once
- 80 cfm
One line for the file or the vendor
20 cfm continuous + 60 cfm intermittent at 30% duty, 15% leaks, 20% growth: 52 cfm, 15 hp, 160 gal receiver at 100 psig.
How it is figured
- Average demand = continuous cfm + intermittent cfm × duty cycle. Compressor delivery = demand × leak allowance × growth. Horsepower at about 4 cfm per hp (rotary screw at 100 psig; reciprocating 3 to 3.5).
- Receiver: 3 gallons per cfm of compressor capacity carries the peaks of intermittent tools; larger where many tools start together.
Sources: Compressed Air and Gas Institute (CAGI), Compressed Air and Gas Handbook; Compressor manufacturer sizing guides (Quincy, Ingersoll Rand, Sullair). A planning calculator; the maker, the engineer of record, or the code official confirms the final number.
Questions people ask
- What size compressor for a dock and shop?
- A dock with air-powered levelers and a few impact tools runs on a 10 to 15 hp rotary screw, 40 to 60 cfm. A body shop with sanders and paint runs 25 to 30 hp. Oversizing wastes power at part load unless the compressor has a VFD.
Related calculators: Compressed air leak cost, Electricity cost, Breaker size. All calculators.