Loading dock
Dock bumper projection for a declined approach
Dock height, the tallest trailer, and the grade of the approach in; how far the trailer top leans toward the wall and the bumper projection that keeps it 4 inches off.
Read the guide: what the number means and how to use it
- On a decline the trailer sits nose-high and its back leans toward the wall by the grade times the height above the bumper line: (trailer height − dock height) × grade.
- Bumper projection = the clearance you want at the trailer top plus that lean; standard laminated bumpers come in 4, 4.5, 6, 8, 10, 12 inches and deeper.
Need it quoted?
Send the door count and these numbers and the quotation comes back with the levelers, seals, bumpers, and restraints as line items.
Dock equipmentDock bumper projection
Bumper projection needed
7.4 in
4" clearance + 3.4" lean
Standard bumper to order
8 in
laminated or molded bumper projection
Trailer top leans toward the wall
3.4 in
- Clearance with 4-inch bumpers
- 0.6 in
- with 6-inch bumpers
- 2.6 in
- with 10-inch bumpers
- 6.6 in
One line for the file or the vendor
48" dock, 13'-6" trailer, 3% decline: trailer leans 3.4", bumpers 7.4" needed for 4" clearance, order 8".
How it is figured
- On a decline the trailer sits nose-high and its back leans toward the wall by the grade times the height above the bumper line: (trailer height − dock height) × grade.
- Bumper projection = the clearance you want at the trailer top plus that lean; standard laminated bumpers come in 4, 4.5, 6, 8, 10, 12 inches and deeper.
Sources: Pentalift, declining approach and dock bumper projection guidance; Loading Dock Supply, dock seal and bumper FAQ (keep the trailer 4 inches off the wall). A planning calculator; the maker, the engineer of record, or the code official confirms the final number.
Questions people ask
- What happens if the bumpers are too short?
- The top of the trailer hits the wall above the door, which cracks block, bends the door frame, and crushes the dock seal's head pad. On a 4% decline a 13'-6" trailer on a 48" dock leans about 4.5 inches, so standard 4-inch bumpers leave nothing.
Related calculators: Dock seal slope and taper, Dock leveler length and working range, Dock door size. All calculators.