Loading dock · guide
Dock doors needed: the guide
A dock with too few doors backs trucks up in the yard and pays detention; one with too many pays for levelers, seals, and heated air that sit empty. The count comes from door-hours, not from the square footage.
Why this number matters
Every trailer that comes to the building occupies a door for a stretch of time: the backing in, the paperwork, the unloading or loading, the pull-out. Multiply the trucks on a busy day by that stretch and you have door-hours, and door-hours divided by the hours the dock runs is how many doors are busy at any moment on average. The peak is higher than the average, because carriers cluster at the start of the day and before cutoffs, and no door runs at 100% because trailers wait on paperwork and lifts cross paths. The arithmetic is simple; the inputs are what decide it.
The dwell time is the number most people get wrong. A palletized live load on a good dock is in and out in 25 minutes; a floor-loaded import container takes two hours and a crew. The same building with the same truck count needs twice the doors for the second kind of freight. Drop trailers are the other trap: a trailer that sits at a door for a day is a door you do not have, so they get their own count or their own parking.
Doors are cheap to add in the drawing and expensive to add after the wall is up. Most designers size for the volume three to five years out, build the pit and the opening for every position, and install the leveler and seal on the ones that are needed on day one.
How it is figured
- Door-hours per day = trucks × minutes at the door ÷ 60. Average doors busy = door-hours ÷ hours of operation; peak doors busy = average × peak factor.
- Positions = peak doors busy ÷ target utilization, rounded up, plus the doors drop trailers occupy. Utilization is what the working doors would actually run at.
A worked example
Forty-eight trucks on a busy day at an hour each is 48 door-hours. Over a ten-hour dock that is 4.8 doors busy on average, 6.2 at a 1.3 peak, and at 80% utilization the building wants 8 working doors, plus 2 for the drop trailers that park overnight: 10 positions.
The tool's starting values, and what it returns for them:
| Trucks per day | 48 |
| Hours the dock works | 10 h per day |
| Average time at the door | 60 min |
| Peak factor | 1.3 |
| Target utilization | 0.8 |
| Drop trailers parked at doors | 2 |
| Dock positions to build | 10 |
| Doors busy at the peak | 6.2 |
| Utilization of the working doors | 60 % |
| Door-hours per day | 48 |
| Trucks per working door per day | 6 |
What to gather
- Count trucks on the five busiest days from the gate log or the WMS appointment list, and take the highest.
- Time at the door: the difference between the check-in and check-out stamps on 20 or 30 loads, averaged.
- Peak factor: the busiest hour's truck count divided by the day's average per hour.
Tools: the gate log or yard management system, the WMS appointment report
Mistakes that catch people
- Counting trucks per week and dividing by five: it is the busiest day that jams the yard.
- Using the average time at the door when the freight mix includes floor-loaded containers; size on the slow loads, or give them their own doors.
- Forgetting drop trailers, which occupy doors without moving freight.
- Sharing a six-door dock between receiving and shipping and discovering that both peak at 7 am.
Rules of thumb
- A palletized trailer at 25 minutes turns 15 trucks a day per door; a floor load at two hours turns four.
- Twelve-foot door centers are the minimum for 102-inch trailers; fourteen gives drivers room.
- Above about ten doors, split receiving from shipping.
When to stop calculating and make a call
- The yard cannot hold the trailers the count implies: apron depth and trailer parking come first.
- The freight is temperature-controlled: cold docks are sized with vestibules and dwell times of their own.
Questions people ask
- How many trucks can one dock door handle a day?
- At 60 minutes a trailer on a 10 hour dock at 80% utilization, about 8. Palletized live loads at 25 minutes push that past 15; floor-loaded containers at 2 hours pull it under 4. The dwell time decides it.
- Should receiving and shipping share doors?
- Small buildings share; above about 10 doors most operations split them so the lifts do not cross, and size each side with its own trucks and dwell.
- What about future growth?
- A door position in a new building is cheap compared with adding one later. Many designers size for the five-year volume, or build the pit and the opening and add the leveler when needed.
Standards and sources
- WERC / MHI warehouse planning practice (door-hours method)
- Kelley / Rite-Hite dock planning guides (peak factors, dwell times)
This guide and the tool are planning aids. The equipment maker, the engineer of record, the accountant, or the code official confirms the final number for your building.