Line Item SupplyIndustrial Equipment
Request a Quote

Material handling and racking · guide

Forklift fleet size: the guide

The fleet is the work in truck-minutes divided by the minutes a truck can actually work in a shift, rounded up, plus the spares that keep the shift running when one is in the shop.

Open the calculator

Why this number matters

Every pallet move has a cycle: pick up, travel, place, return. Multiply the moves a shift must make by the average cycle and you have truck-minutes of work. A truck does not work the whole shift: breaks, charging, pre-shift checks, waiting at the dock, and the walk to the next task take a quarter of it, so the available minutes are the shift times about 75%. Work over available is the trucks needed, and spares cover maintenance and the peak day.

The cycle time is where the fleet is won or lost. Travel distance dominates it, so slotting the fast movers near the dock, shortening the putaway path, and splitting receiving from shipping all shrink the fleet without buying anything. Timing twenty moves of each kind with a stopwatch or pulling the WMS task timestamps gives a real average; a guess of three minutes when the truth is five understaffs the shift by two trucks.

The output also sets the charging room, the battery count, and the operator count, each of which has its own calculator or its own rule.

How it is figured

  • Truck-minutes of work = moves × cycle time. Available minutes per truck = shift hours × 60 × productive fraction. Trucks = work ÷ available, rounded up, plus spares.

A worked example

Six hundred moves at four minutes each is 2,400 truck-minutes; an 8-hour shift at 75% gives 360 available minutes a truck, so seven working trucks plus one spare, each making about 86 moves.

The tool's starting values, and what it returns for them:

Pallet moves per shift600
Average cycle time4 min
Shift length8 h
Productive time0.75
Spare trucks1
Trucks to run8
Working trucks7
Moves per truck per shift86
Truck-hours of work40 h
Utilization of the working trucks71 %

Mistakes that catch people

  • Averaging the cycle time across a quiet week.
  • Assuming 100% productive time.
  • Sizing to the average day and losing the peak day to overtime and detention.

Rules of thumb

  • Productive time 70 to 80% of the shift.
  • Cycle 3 to 6 minutes in a typical warehouse; travel is most of it.
  • One spare per six to eight working trucks.

When to stop calculating and make a call

  • Automation or AGVs: the vendor's simulation replaces the arithmetic.
  • Multi-shift operations with opportunity charging: the battery and charger count becomes its own design.

Questions people ask

How do I get the cycle time?
Time 20 or 30 moves of each kind with a stopwatch or pull them from the WMS task timestamps, and weight them by how many of each kind the shift does. Travel distance dominates, which is why slotting fast movers near the dock cuts the fleet.

Standards and sources

  • Warehouse engineering practice (time standards and fleet sizing); MHI

This guide and the tool are planning aids. The equipment maker, the engineer of record, the accountant, or the code official confirms the final number for your building.