Line Item SupplyIndustrial Equipment
Request a Quote

Efficiency and labor · guide

OEE calculator: the guide

OEE is three fractions multiplied: how much of the planned time the machine ran, how fast it ran against its best, and how much of what it made was good; the breakdown tells you which to fix.

Open the calculator

Why this number matters

Overall equipment effectiveness comes from the total productive maintenance movement and is the standard measure of how well a machine, a line, or a dock door is used. Availability is run time over planned time, lost to breakdowns and changeovers. Performance is actual output over what the ideal cycle time would have made in the run time, lost to slow cycles and minor stops. Quality is good pieces over total, lost to rejects and startup scrap. The product of the three is OEE, and 85% is the world-class benchmark; most plants measure 40 to 60% the first honest time.

The point is the losses, not the score. The calculator converts each fraction into minutes lost, which ranks the fixes: downtime says maintenance and changeover; speed says tooling, feeding, and minor stops; quality says process and startup. The six big losses in Nakajima's framework are those three pairs.

The same arithmetic runs on a dock door: planned hours, hours with a trailer at the door, trailers per hour against the best rate, loads shipped without error. It is how the doors you have are used, which is the number the dock doors calculator does not know.

How it is figured

  • Availability = run time ÷ planned time. Performance = pieces made ÷ (run time ÷ ideal cycle time). Quality = good pieces ÷ pieces made. OEE = A × P × Q, and fully productive time = planned time × OEE.
  • The lost minutes are the six big losses grouped three ways: downtime (breakdowns, setups), speed (reduced speed, minor stops), quality (rejects, startup scrap).

A worked example

An eight-hour shift with 45 minutes of breaks has 480 planned minutes; 55 minutes of downtime gives 88.5% availability; 18,000 pieces against 21,250 possible at a 1.2-second cycle is 84.7% performance; 350 rejects give 98.1% quality; OEE is 73.5%, with 55 minutes lost to downtime, 65 to speed, and 7 to quality.

The tool's starting values, and what it returns for them:

Planned production time480 min
Unplanned downtime55 min
Ideal cycle time1.2 sec per piece
Total pieces made18,000
Rejects and rework350
OEE73.5 %
Availability88.5 %
Performance84.7 %
Quality98.1 %
Fully productive time353 min
Lost to downtime55 min
Lost to slow cycles and minor stops65 min
Lost to rejects7 min
Good pieces per planned hour2,206

What to record on a shift

  1. Planned time: the shift minus the breaks you schedule; do not subtract breakdowns, they are the point.
  2. Downtime: every stop with a reason, from the operator's log or the machine's PLC counter; changeovers count.
  3. Count and rejects from the counter and the scrap bin; the ideal cycle time from the nameplate or the best hour you have ever run.

Tools: the machine's counters, a downtime log, a stopwatch for the ideal cycle

Mistakes that catch people

  • Subtracting breakdowns from the planned time to make availability look good.
  • Using the average cycle as the ideal; the ideal is the nameplate or the best demonstrated.
  • Reporting the score and not the losses.

Rules of thumb

  • World class 85% (90% A, 95% P, 99% Q). Typical 60%. First measurement often 40%.
  • Fix the biggest loss first; it is usually availability.
  • Record downtime with a reason every time or the number is fiction.

When to stop calculating and make a call

  • Automating the count: the machine's PLC and a simple OEE package replace the clipboard.
  • Lines with multiple machines: the bottleneck's OEE is the line's.

Questions people ask

What is a good OEE?
85% is the usual world-class benchmark (90% availability, 95% performance, 99% quality); 60% is typical for a plant that has just started measuring, and 40% is common on the first honest count. The number matters less than the loss breakdown, which tells you whether to fix breakdowns, speed, or scrap first.
Does OEE work for a dock or a warehouse?
The same arithmetic applies to a dock door (planned hours, hours with a trailer at the door, trailers per hour against the best rate, loads shipped without error) or a conveyor line. Use the dock door calculator for the door count; use this to see how well the doors you have are used.

Standards and sources

  • Nakajima, Introduction to TPM (the OEE definition and the six big losses)
  • SEMI E10 and OEE Industry Standard (OEE Foundation)

This guide and the tool are planning aids. The equipment maker, the engineer of record, the accountant, or the code official confirms the final number for your building.