Line Item SupplyIndustrial Equipment
Request a Quote

Efficiency and labor · guide

Takt time and stations: the guide

Takt is the pace the customer sets, available time over demand; cycle time is how long the work takes; the stations needed are one divided by the other, with uptime in the denominator.

Open the calculator

Why this number matters

If a line has 435 productive minutes a day and the customer wants 400 units, every unit has to leave every 1.09 minutes: that is takt. If the work takes 3.2 minutes per unit, one station cannot keep up and the work is split across enough stations that each takes less than takt, with a margin for the stops that will happen. Balanced lines run each station at 85 to 90% of takt; one loaded to 98% misses the day on the first jam.

The same arithmetic sizes a pack line, a kitting cell, a dock crew loading a wave of trailers, or a cleanroom assembly bench, and the capacity it reports, what the stations can do at the uptime assumed, is the honest answer to whether the demand can be met. Changing the shifts, the breaks, or the uptime moves takt; changing the work content or the stations moves the cycle.

Takt is also the pace the conveyor, the material delivery, and the forklift schedule have to match, which is why it sits beside the throughput and fleet calculators.

How it is figured

  • Takt time = available production time ÷ customer demand. Stations = cycle time ÷ (takt × uptime), rounded up. Capacity = available time × uptime ÷ the work per station.

A worked example

Four hundred units a day over 435 available minutes is a takt of 1.09 minutes, 65 seconds; 3.2 minutes of work at 90% uptime needs four stations, each loaded to about 73% of takt, with capacity for about 490 units a day.

The tool's starting values, and what it returns for them:

Demand per day400 units
Shifts per day1
Minutes per shift480 min
Breaks and meetings per shift45 min
Cycle time of the work3.2 min per unit
Expected uptime90 %
Takt time1.09 min per unit
Stations or people needed4
Capacity with that many489 units per day
Available time435 min per day
Work per station0.8 min

Mistakes that catch people

  • Using the shift length as available time without taking out breaks and meetings.
  • Loading stations to 100% of takt.
  • Balancing to the average demand and losing the peak season to overtime.

Rules of thumb

  • Takt = available minutes ÷ demand.
  • Stations = cycle ÷ (takt × uptime), rounded up.
  • Load stations to 85 to 90% of takt.

When to stop calculating and make a call

  • Line balancing across many stations with precedence constraints: an industrial engineer's balance chart.
  • Mixed-model lines: a weighted takt and sequencing rules.

Questions people ask

Takt time or cycle time?
Takt is the pace the customer sets; cycle time is how long the work takes. If the cycle is longer than takt you need more stations or less work per unit; if it is much shorter you are overstaffed. The two should sit within about 10% of each other on a balanced line.

Standards and sources

  • Rother and Harris, Creating Continuous Flow (Lean Enterprise Institute)

This guide and the tool are planning aids. The equipment maker, the engineer of record, the accountant, or the code official confirms the final number for your building.