Line Item SupplyIndustrial Equipment
Request a Quote

Metal buildings and structure

Concrete for a slab, footings, and a ramp

Slab size and thickness, footing size and run, and a ramp if there is one in; the cubic yards for each, the waste, and the truckloads.

Read the guide: what the number means and how to use it

  • Volume in cubic feet ÷ 27 = cubic yards. Slab: length × width × thickness. Footing: width × depth × length. Ramp: length × width × (half the rise + the slab thickness), a wedge on a slab.

Need it quoted?

Send the footprint, eave height, and openings and the quotation comes back with frames, sheeting, trim, insulation, and doors as line items.

Metal buildings

Concrete yardage

slab111.1 ydfootings23.7 ydramp0 yd

Order

146 cu yd

134.8 + 8% waste

Truckloads

15

at 10 yards a truck

Slab

111.1 cu yd

Footings
23.7 cu yd
Ramp
0 cu yd
Slab area
6,000 sq ft

One line for the file or the vendor

Slab 100x60 ft at 6": 111.1 yd; footing 24x12" x 320 ft: 23.7 yd; ramp 0 yd; order 146 yd (8% waste), 15 trucks.

Keep this result, or have it priced

One email with what you asked for. No list, no newsletter.

How it is figured

  • Volume in cubic feet ÷ 27 = cubic yards. Slab: length × width × thickness. Footing: width × depth × length. Ramp: length × width × (half the rise + the slab thickness), a wedge on a slab.

Sources: Geometry; ACI 302.1R for slab practice. A planning calculator; the maker, the engineer of record, or the code official confirms the final number.

Questions people ask

How thick should a warehouse slab be?
Six inches of 4,000 psi concrete carries most forklift and rack loads on a prepared base; heavy rack post loads, wide trucks, or poor soil push it to 7 or 8 inches, and the rack maker's post loads should be checked against the slab by an engineer.

Related calculators: Pallet rack beam and frame loads, Mezzanine floor and column loads, Forklift ramp grade. All calculators.