Line Item SupplyIndustrial Equipment
Request a Quote

By use: shops and storage

Shops and equipment buildings: size it around the biggest door.

A shop is sized by what drives into it. The tallest and widest piece of equipment sets the door, the door sets the eave height, and the turning room sets the width. Many shops and storage buildings are a good fit for a cold-formed package.

Isometric drawing of a metal building with a sawtooth roof and clerestory glazing

Representative drawing of the equipment type, not the exact configuration quoted.

Sizing the building

Work from the equipment outward.

  • Largest vehicle or machine: height, width, and length
  • Door type and size, and the headroom the door needs above the opening
  • Number of bays and whether you drive through
  • Lifts, a small crane, or a mezzanine for parts
  • A heated shop area separate from cold storage
Isometric drawing of a building with two insulated sectional overhead doors, a walk door, and bollards

Representative drawing of the equipment type, not the exact configuration quoted.

Cold-formed or rigid frame

For a shop of modest width with a simple gable roof, a cold-formed building is usually the economical choice and can be erected by a small crew. When the building is wide, the doors are very tall, the snow load is heavy, or you want a crane, a rigid frame is the better system. We quote what fits and tell you where the line falls for your building.

Fitting it out

Sectional or coiling doors, a wire-partition tool crib, workbenches and cabinets, flammable storage cabinets, and guardrail around the wash bay or the lift are all on the same quotation if you want them.