Line Item SupplyIndustrial Equipment
Request a Quote

Applications

Coolers and freezers: the door, the dock, and the barrier are where the cold escapes.

A cooler or freezer is a box, a refrigeration system, and a set of openings. The box and the system are the refrigeration contractor's; the openings are ours. Every time a door opens, warm wet air goes in and becomes frost on the floor and ice on the evaporator, and the compressor runs to make up the loss. The equipment that controls that is the door, the dock seal, the air curtain, and the leveler that closes the pit.

This page is the specification for the openings in a cold room, from a supermarket walk-in to a 200,000 square foot freezer, and the barriers and rooms that go with them.

Isometric drawing of a high-speed fabric door and an insulated sectional door with bollards

Representative drawing of the equipment type, not the exact configuration quoted.

Reviewed November 4, 2026. Official sources are linked where they exist.

Short answer

For a cooler or freezer we quote the high-speed doors (freezer-rated with heated frames, defrost, and sealed perimeters; cooler-rated with lighter specification), strip doors and curtains for openings that do not justify a powered door, cold dock packages (full-seal shelters or seals, vertical-storing levelers, restraints, bumpers) so a refrigerated trailer unloads without opening the room to the weather, air curtains at doors that stay open, guardrail and bollards for slick floors, and modular rooms inside or beside the cold for supervisors and breaks. The box and the refrigeration are by your refrigeration contractor. Every item is specified to the temperature on each side and the traffic through the opening, and quoted from a plan or a photo with freight and installation on the same quotation when you want it.

What this facility buys from us

How to specify a freezer door

The door is specified by the temperatures on each side and the traffic through it.

Freezer and cooler door specification items
Temperature differenceFreezer-to-dock and freezer-to-cooler doors need a heated perimeter frame and a defrost on the curtain; cooler-to-ambient doors usually do not
TrafficCycles per hour and what passes through (forklift, pallet jack, cart, people) set the speed, the opening size, and the activation
ActivationLoop detectors or radar for vehicles; pull cords or push plates where people walk through; interlocks where two doors form an airlock
SealPerimeter seals and a bottom seal rated for the pressure difference; the seal is what stops the air exchange when the door is closed
Cycle ratingA door that opens 500 times a day needs a cycle rating to match or it fails in a year
Breakaway and impactCurtains that release when hit and reset without a service call keep the door working after the forklift finds it

What moves the energy number

Air exchange through the openings is the largest controllable load on a cold room after the refrigeration system itself. The door's open time per cycle, the number of cycles, and the seal when closed decide the exchange; a high-speed door with a tight seal in place of a slow door or a strip curtain is the usual payback item. Air curtains at doors that stay open during stocking, and a sealed dock so the trailer unloads without opening the room to the weather, are the next two. Your refrigeration contractor or utility program can put a number on the saving; we put the equipment on the quotation.

The cold dock

A refrigerated trailer at a cold dock is a sequence of seals: the shelter or seal around the trailer, the leveler that closes the pit, and the door that closes the opening. A vertical-storing leveler stores upright so the dock door seals to the floor, and the trailer doors can be opened inside the building. The dock seal versus shelter guide covers the choice; the leveler sizing guide covers capacity.

Floors, barriers, and people

Frost makes floors slick and forklifts slide. Rated guardrail along walkways and at the dock face, bollards at the evaporators and the door jambs, and column guards keep the people and the equipment apart. Supervisors who have to be in the cold get an insulated modular room with its own heat; everyone else gets a warm room outside with a window in. Cold stress rest areas are part of a good program.

What to send

A plan or a photo of each opening, with the numbers.

  • Each door: width and height of the opening, temperatures on both sides, what passes through, cycles per hour, and a photo of the wall
  • Dock: positions, trailer types and heights, whether the trailer doors open inside, the forklift
  • Air curtains: door width and height and the mounting side
  • Guardrail: a marked-up plan with lengths
  • Rooms: size, head count, inside the cold or outside
  • Power: where it is for door operators, heated frames, and leveler controls

Questions buyers ask

Do you sell walk-in cooler and freezer boxes?
The box and the refrigeration are by your refrigeration contractor. We quote the doors, the dock equipment, the air curtains, the barriers, and the rooms around them, and we coordinate the door openings with the box supplier.
What is the difference between a freezer door and a cooler door?
A freezer door has a heated perimeter frame and a defrost on the curtain so it does not freeze shut, and a seal rated for the larger temperature difference. A cooler door is a lighter specification.
Is a strip door enough?
For a lightly used opening, often. For a forklift opening that cycles all shift, a high-speed door pays for itself in energy and frost control.
What leveler goes on a freezer dock?
A vertical-storing leveler, so the dock door seals to the floor and the trailer doors open inside the building.
Can installation be on the quotation?
Yes. Tick "Quote installation too" and an installer from our network prices the door, the dock, or the guardrail from the same drawings.

Do your own research

Official sources first. We link the rule, not a summary of the rule, wherever one exists.

Guides for this facility

Work it out

Free calculators for the numbers this decision turns on, each with a guide to the method.

Related industries