Reviewed November 4, 2026. Official sources are linked where they exist.
Short answer
Meat and poultry plants buy washdown-rated high-speed doors between kill, chill, cut, further processing, packaging, cooler, freezer, and dock, hygienic modular rooms for QA, the USDA FSIS inspection office, and the welfare and break rooms, cooler and freezer dock packages with full-seal shelters, vertical-storing levelers, and restraints, stainless or galvanized guardrail and bollards for the wet forklift routes, mezzanines over packaging and dry storage, air curtains at the doors that stay open, and cool-down and warm-up rooms for the workforce. FSIS inspection requirements, the HACCP plan, and the sanitation schedule set the specification; we quote from the floor plan with drawings and freight and installation on the same quotation when you want it.
What this facility buys from us
- Washdown high-speed doors
Stainless or washdown-rated frames and motors, sealed perimeters, between every zone and into the coolers.
- QA, FSIS inspection, and welfare rooms
Hygienic modular rooms with cleanable surfaces and coved bases, drawn where the inspection program needs them.
- Cooler and freezer dock packages
Full-seal shelters, vertical-storing levelers, restraints, and bumpers for refrigerated trailers.
- Stainless and galvanized guardrail
Rated barriers and bollards that take the washdown and the sanitizer.
- Mezzanines over packaging and dry storage
Cartons, film, and supplies above the floor, engineered for the load and the washdown below.
- Cool-down and warm-up rooms
Rest rooms with their own HVAC for the hot and the cold ends of the plant.
- Air curtains
At the live receiving and the dock doors that stay open.
Every door is on the HACCP plan
The door between raw and ready-to-eat, between the cut room and packaging, and between packaging and the cooler is a control: it keeps the zones apart, holds the temperature, and must be cleanable. A high-speed roll-up door in washdown specification cycles in seconds, seals when closed, and survives the hose and the sanitizer. The high-speed versus rolling steel guide covers the cycle numbers; for this plant the washdown rating, the seal, and the activation are the specification.
Rooms the inspector and the workforce use
FSIS requires office space for the inspection program; QA needs a lab; the workforce needs welfare rooms, a break room, and a place to warm up or cool down. Modular rooms with hygienic panels, sealed joints, and coved bases meet the finish rules and go up in days. The inspector's office goes where the program says, with a window onto the floor. A 3D rendering comes with the quotation.
Cold docks
Finished product ships cold and must not sit open. Each position gets a full-seal shelter or seal, a vehicle restraint, a vertical-storing leveler that seals the pit, bumpers, and a sealed door. The dock seal versus shelter guide and the dock leveler sizing guide cover the choices.
Barriers that take the hose
Forklifts and pallet jacks run wet floors between the zones. Stainless or galvanized guardrail with matching anchors, bollards at the equipment and the door jambs, and column guards protect the people and the structure and survive the sanitation shift. The guardrail rating guide explains the impact numbers.
Rules and programs
USDA FSIS, FDA where applicable, and OSHA.
- USDA FSIS sanitation performance standards and HACCP regulations for meat and poultry plants, including facility requirements and inspection office space
- FDA 21 CFR Part 117 where the plant also handles FDA-regulated foods
- OSHA 1910.178 forklifts, 1910.22 wet floors, and OSHA's cold stress guidance
- State heat rules for the cook and the rendering areas
- Local building and health codes for rooms and mezzanines
What to send
The zoning plan and the temperatures.
- Doors: each opening, size, zones and temperatures on both sides, cycles, washdown yes or no
- Rooms: location, size, use, head count, finish requirement
- Dock: positions, trailer types and temperatures, the forklift
- Guardrail: a marked-up plan with the wet routes and the drains
- Mezzanine: footprint, clear height, the load, and whether the floor below is washed
Questions buyers ask
- What door goes between the cut room and packaging?
- A high-speed roll-up door in washdown specification with a sealed perimeter and a speed matched to the traffic. Both sides are cleaned daily, so the frame and the motor have to be rated for it.
- Do you build the FSIS inspection office?
- Yes, as a hygienic modular room with a window onto the floor, drawn where the program requires it.
- Can an office survive a washdown zone?
- With hygienic panels, sealed joints, coved bases, and a door rated for it, yes. Many plants put the QA lab there and the offices on a mezzanine above.
- What guardrail for a wet floor?
- Galvanized or stainless with matching anchors in the washdown areas; standard powder-coated guardrail in the dry packaging and shipping areas.
- Can installation be on the quotation?
- Yes. Tick "Quote installation too" and an installer from our network prices the labor with sanitary-zone practices and a sanitation-shift schedule.
Do your own research
Official sources first. We link the rule, not a summary of the rule, wherever one exists.
- 9 CFR Part 416, Sanitation
eCFR
FSIS sanitation performance standards for meat and poultry establishments.
- 21 CFR Part 117, Preventive Controls for Human Food
eCFR
Applies where the plant handles FDA-regulated food.
- 29 CFR 1910.22, Walking-working surfaces
OSHA
Wet floors kept free of hazards.
Guides for this facility
- High-speed doors vs rolling steel doors: cycles, speed, security and energy
- Dock seal vs dock shelter: which one belongs on your dock doors
- What a Guardrail Impact Rating Means: ANSI MH31.2 Explained
- Indoor Heat Rules in 2026: Federal Status, State Requirements, and What a Cool-Down Room Needs
- How Much Does a Mezzanine Cost per Square Foot? Published Ranges and What Moves the Number
Work it out
Free calculators for the numbers this decision turns on, each with a guide to the method.